VOLVO
ADM-E003 - Configuration fault
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Nur Motor: D4164T
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Nur Motor: D4164T
- Volvo V50 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Nur Motor: D4164T
Was bedeutet der Fehlercode?
The ADM checks its own configuration ID against the one that the CEM broadcasts on the data network. If the IDs do not match, or if communication between the ADM and CEM is broken, the code is set. A used control module with different software can cause this.
Mögliche Ursachen
- Incorrect CAN configuration ID, for example a used module with other software or hardware fitted
- Open circuit in the CAN wire between the module and the central electronic module (CEM)
Was Sie tun können
- 1Find out whether a control module has been replaced, especially a used one, and whether new software was downloaded at the time
- 2Read the codes in the CEM and deal with any communication faults first
- 3Check that the wires between the module and the CEM have no breaks and that the connectors are secure
- 4Have a workshop download the correct software to the module if it does not match the car
- 5Clear the code and check that it does not return
Symptome, die Sie bemerken können1
- No clear symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.