VOLVO
ADM-E010 - Power supply control module. Signal too low
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo C30 (2007–2013)2011Nur Motor: D4164T
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo S40 (2004–2013)2011Nur Motor: D4164T
- Volvo V50 (2004–2013)2005–2006Nur Motor: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: D4164T, D4204T
- Volvo V50 (2004–2013)2011Nur Motor: D4164T
Was bedeutet der Fehlercode?
The additive dosing module (ADM) compares its own power supply with what the central electronic module (CEM) reports. This code is relevant only when the engine control module has also stored a code for faulty or missing communication with the ADM. Otherwise it does not indicate a fault and can simply be cleared.
Mögliche Ursachen
- Poor contact, resistance or corrosion at the terminals
- Open circuit in the power supply
- Power supply shorted to ground
- Damaged additive dosing module (ADM)
Was Sie tun können
- 1Check whether the engine control module has stored codes for communication with the ADM; if not, the code can be cleared without further action
- 2Check that the battery and its terminals are in good condition
- 3Check the connectors at the ADM for looseness, resistance and corrosion
- 4Check that the power supply and ground connection to the ADM are intact
- 5If the fault persists together with communication faults, have a workshop trace the supply and the module
Symptome, die Sie bemerken können1
- No clear symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.