VOLVO
ADM-P192229 - Fuel Additive Level Circuit. General Signal Failures. Signal signal invalid
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The ADM keeps watch on the sensor that reads the tank level. The reference signal from the sensor has been registered as incorrect or implausible, and the code. The sensor is built into the additive tank and cannot be replaced separately.
Mögliche Ursachen
- Poor contact, resistance or corrosion at the terminals
- Break in the signal wire, or a short to ground or to supply voltage
- Damaged additive level sensor
- Damaged additive dosing module (ADM)
Was Sie tun können
- 1Check the connector at the additive tank for looseness, resistance and corrosion
- 2Clear the code and check whether it returns
- 3If the fault returns with no visible cause, the additive tank may need replacing because the sensor is built into it
- 4After the repair, check that the code does not come back
Symptome, die Sie bemerken können1
- Message in the text window of the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.