VOLVO
ADM-P192329 - Fuel Additive Level Circuit Range/Performance. General Signal Failures. Signal signal invalid
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The ADM has registered that the signal from the additive level sensor lies outside its permitted range, meaning it is faulty or implausible. Because the sensor is part of the additive tank, the tank may need replacing if the fault persists.
Mögliche Ursachen
- Poor contact, resistance or corrosion at the terminals
- Break in the signal wire, or a short to ground or to supply voltage
- Damaged additive level sensor
- Damaged additive dosing module (ADM)
Was Sie tun können
- 1Check the connector at the additive tank for looseness, resistance and corrosion
- 2Clear the code and road test to see whether it returns
- 3If the fault persists with no visible cause, the tank may need replacing because the sensor is built into it
- 4After any repair, check that the code does not come back
Symptome, die Sie bemerken können1
- Message in the text window of the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.