VOLVO
ADM-P193014 - Fuel Additive Pump Control Circuit Low. General Electrical Failures. Circuit short to ground or open
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The ADM monitors the additive pump control circuit and has registered either a short to ground in the wiring to the pump or an open circuit. The fault shows up as the emissions warning lamp. The pump sits in the additive tank, so the tank may need replacing if the fault persists.
Mögliche Ursachen
- Wiring to the additive pump shorted to ground
- Damaged additive pump
- Damaged additive dosing module (ADM)
Was Sie tun können
- 1Check the connector at the additive tank for damage and moisture
- 2Follow the pump wiring and look for chafing or damaged insulation
- 3Clear the code and check whether it returns
- 4If the code returns with no visible cause, the additive tank may need replacing
- 5If the fault remains, have a workshop with diagnostic equipment check the pump and the module
Symptome, die Sie bemerken können1
- Emissions warning lamp lit
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.