VOLVO
ADM-P193115 - Fuel Additive Pump Control Circuit High. General Electrical Failures. Circuit short to battery or open
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The ADM monitors the additive pump control circuit and has registered a short to supply voltage on the pump's wiring. The fault shows up as the emissions warning lamp. Since the pump sits in the additive tank, the tank is usually the part replaced if the fault persists.
Mögliche Ursachen
- Pump wiring shorted high to the supply
- Damaged additive pump
- Damaged additive dosing module (ADM)
Was Sie tun können
- 1Follow the pump wiring and look for chafing or damaged insulation
- 2Check the connector at the additive tank for damage and moisture
- 3Clear the code and check whether it returns
- 4If the code returns with no visible cause, the additive tank may need replacing
- 5If the fault remains, have a workshop with diagnostic equipment check the pump and the module
Symptome, die Sie bemerken können1
- Emissions warning lamp lit
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.