VOLVO
ADM-P193486 - Vehicle Speed Signal. Bus Signal / Message Failures. Signal invalid
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The additive dosing module (ADM) has registered that the vehicle speed signal on the CAN network is incorrect or missing. The signal comes from the brake control module (BCM), so the fault usually starts there.
Mögliche Ursachen
- Fault in the brake control module (BCM), which sends the speed signal
Was Sie tun können
- 1Read the codes in the brake control module (BCM) first and deal with those
- 2Clear the code only after the fault in the brake control module has been fixed
- 3Check the battery and its terminals, since voltage problems can disturb the data network
- 4If the fault remains, have a workshop with diagnostic equipment check the data network and the brake control module
- 5The brake control module is safety-critical – do not work on the brake system yourself, have a workshop do it
Symptome, die Sie bemerken können1
- No clear symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.