VOLVO
ADM-U030000 - Internal Control Module Software Incompatibility. General Failure Information. No sub type information
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The additive dosing module (ADM) has registered that its software does not match the car's configuration. It checks its configuration ID against what the CEM sends on the CAN network, and the code is set on a mismatch or when communication with the CEM is broken. Because the module cannot communicate while the fault is active, the code can only be read if it is intermittent.
Mögliche Ursachen
- A wrongly matched configuration ID, for example from a second-hand module with other software or hardware
- Open circuit in the CAN wire between the module and the CEM
Was Sie tun können
- 1Check whether the ADM module has recently been replaced, especially if it is second-hand, and whether the correct software was downloaded
- 2Read the codes in the CEM and deal with any communication faults first
- 3Check that the wire between the module and the CEM has no breaks and that the connectors are secure
- 4Have a workshop download the correct software if it does not match the car
- 5Clear the code and check that it does not return
Symptome, die Sie bemerken können1
- No clear symptoms for the driver
Was der Fehler beeinflussen kann1
- The module answers diagnostic commands, but normal CAN communication does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.