VOLVO
ADM-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Additiv-Dosiermodul (ADM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The ADM has not received the vehicle configuration it expects from the CEM, so its initial configuration is not finished. The code is set when that information is missing after the ignition is switched on. It is often a communication break on the CAN network.
Mögliche Ursachen
- Incorrect CAN configuration ID, for example after fitting a used module with other software or hardware
- Open circuit in the CAN wire between the module and the CEM
Was Sie tun können
- 1Read the codes in the CEM first, since communication faults often go together with them
- 2Check that the ADM module is not second-hand with the wrong software, and whether new software was loaded after fitting
- 3Check the connectors and the wiring between the ADM and the CEM for breaks
- 4With diagnostic equipment check the data network
- 5Clear the code only once the cause is fixed, and check that it does not return
Symptome, die Sie bemerken können1
- No clear symptoms for the driver
Was der Fehler beeinflussen kann1
- The module answers diagnostic commands, but normal CAN communication does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.