Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    AEM-E001
    VOLVO

    AEM-E001 - Control module communication. Faulty communication

    System

    Zubehörmodul (AEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    10 Modelle

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (10)
    • Volvo C30 (2007–2013)2007–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2013
    • Volvo S40 (2004–2013)2004–2012
    • Volvo S60 (2001–2009)2001–2009
    • Volvo S80 (1999–2006)2001–2006
    • Volvo V50 (2004–2013)2004–2012
    • Volvo V70 (2000–2008)2001–2008
    • Volvo V70 XC / XC70 (2001–2007)2001–2007
    • Volvo XC90 (2003–)2003–2015

    Was bedeutet der Fehlercode?

    The AEM has registered serious interference on the CAN communication, which blocks its communication. The module switches itself off (bus-off) and stays off until the power supply is disconnected. Because it cannot communicate, the code can only be read out if the fault is intermittent.

    Mögliche Ursachen

    • Short circuit between the CAN wires
    • Open circuit in one of the CAN wires
    • Internal fault in the control module
    • Fault in another control module on the same part of the network that disturbs traffic

    Was Sie tun können

    1. 1Read the codes in the central electronic module (CEM) first, and trace any codes found there
    2. 2Measure the resistance and shorts in the CAN network with diagnostic equipment
    3. 3Check the battery and its terminals so the voltage is stable
    4. 4Do not replace the central electronic module for a CAN fault unless fault-finding shows an internal fault
    5. 5Clear the codes after the repair and check that they do not return

    Symptome, die Sie bemerken können1

    • Accessories connected to the module stop working

    Was der Fehler beeinflussen kann1

    • The module switches itself off (bus-off) and stays off until the power supply is disconnected

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.