AUD-000B
VOLVO
AUD-000B - Loudspeakers front. Signal too high / low
System
Audiomodul (AUD)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
3 ModelleS40 (2004–2013), V50 (2004–2013), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (3)
Was bedeutet der Fehlercode?
The audio module (AUD) monitors the signal to the front loudspeakers and has found a level that is too high or too low. The fault may concern one speaker or both, and it shows when the ignition is switched on. The usual cause is a short circuit in the wiring, either to supply voltage or to ground.
Mögliche Ursachen
- Wiring to the front speakers shorted to supply voltage
- Wiring to the front speakers shorted to ground
- Poor contact at a speaker connection
Was Sie tun können
- 1Check the fuses for the audio system
- 2Inspect the wiring to the front speakers for chafing and pinching
- 3Make sure the connectors at the speakers and at the audio module are tight and clean
- 4Locate the short with diagnostic equipment and replace any faulty speaker
Symptome, die Sie bemerken können1
- No sound from the front speakers
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.