VOLVO
BCM-0105 - Steering wheel, wheel alignment. Signal outside its permitted range
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The steering wheel module (SWM) sends steering angle sensor signals onto the CAN network, and the brake control module compares them with a calculated reference value. The reference is worked out from wheel speed signals, yaw rate and sideways acceleration. The code is set when the reference signal is outside its limit, which may come from wheel alignment or from the sensor.
Mögliche Ursachen
- Incorrect front axle alignment
- Steering angle sensor incorrectly fitted
- Damaged steering angle sensor
Was Sie tun können
- 1Check whether codes are stored for the wheel sensors, the steering module or the stability sensor, and fault-find those first
- 2Have a workshop check and, if needed, adjust the front axle alignment before checking the steering angle
- 3Check that the steering angle sensor is correctly fitted and undamaged
- 4The brake system is safety critical: drive carefully until the fault is fixed, and do not work on the stability system yourself
Symptome, die Sie bemerken können3
- Information lamp on
- Traction control does not work
- Stability function does not work
Was der Fehler beeinflussen kann1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.