VOLVO
BCM-0131 - Brake pressure sensor. Faulty signal
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The pressure sensor inside the hydraulic unit gives the brake control module information about the pressure in the brake system. The code is set when the signal is faulty. The fault may lie in the sensor in the hydraulic unit or in the brake control module itself, and it may be intermittent.
Mögliche Ursachen
- Pressure sensor in the hydraulic unit not working
- Fault inside the brake control module (BCM)
Was Sie tun können
- 1Clear the code and check whether it returns; if it does not, the fault may have been a temporary disturbance
- 2Read the fault status with diagnostic equipment
- 3If the fault remains, have a workshop replace the hydraulic unit
- 4The brake system is safety critical: do not work on the hydraulic unit yourself, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können3
- Traction control does not work
- Stability function does not work
- The anti-spin and anti-skid lamps show a fault or no indication
Was der Fehler beeinflussen kann1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.