VOLVO
BCM-0132 - Brake pressure sensor. Incorrect temperature
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The pressure sensor in the hydraulic unit reports a temperature value that the module cannot rely on. The code is set when the module detects a faulty value from the sensor. The fault may be in the sensor or an internal disturbance in the brake control module.
Mögliche Ursachen
- Pressure sensor in the hydraulic unit not working
- Fault inside the brake control module (BCM)
Was Sie tun können
- 1Clear the code and check whether it returns
- 2Read the fault status with diagnostic equipment
- 3If the fault remains, have a workshop replace the hydraulic unit
- 4The brake system is safety critical: do not work on the hydraulic unit yourself, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können3
- Traction control does not work
- Stability function does not work
- The anti-spin and anti-skid lamps show a fault or no indication
Was der Fehler beeinflussen kann1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.