VOLVO
BCM-0134 - Brake pressure sensor. Incorrect offset value
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The pressure sensor in the hydraulic unit has an offset value, a correction value for the sensor's own deviation. The code is set when the module detects that the offset value is wrong. The fault is most often in the sensor or in an internal fault in the brake control module.
Mögliche Ursachen
- Pressure sensor not working
- Fault inside the brake control module (BCM)
Was Sie tun können
- 1Clear the code and check whether it returns; if it does not, the fault may have been a temporary disturbance
- 2Read the fault status with diagnostic equipment
- 3If the fault remains, have a workshop replace the hydraulic unit
- 4The brake system is safety critical: do not work on the hydraulic unit yourself, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können3
- Information lamp on
- Traction control does not work
- Stability function does not work
Was der Fehler beeinflussen kann1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.