VOLVO
BCM-0135 - Brake pressure sensor. Signal outside its permitted range
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The pressure sensor in the hydraulic unit gives a signal that the module judges to be implausible. The cause may be too large a gap between brake pads and disc, air leaking into the hydraulics, the sensor itself or an internal fault in the brake control module.
Mögliche Ursachen
- Too large a gap between brake pads and disc
- Air leak in the hydraulics
- Pressure sensor in the hydraulic unit not working
- Fault inside the brake control module (BCM)
Was Sie tun können
- 1Have a workshop visually inspect the brakes, especially the gap between pads and disc
- 2Have a workshop check the brake hydraulics for air leaks
- 3Clear the code and check whether it returns
- 4The brake system is safety critical: do not work on the brakes or hydraulics yourself, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können3
- Information lamp on
- Traction control does not work
- Stability function does not work
Was der Fehler beeinflussen kann1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.