Was bedeutet der Fehlercode BCM-C001049?

Diagnose und Fehlercodedefinition für BCM-C001049 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

BCM-C001049 - Left Front Inlet Control. System Internal Failures. Internal electronic failure

System

Bremssteuergerät (BCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

The brake control module has registered an internal electrical fault in the part that drives the inlet valve for the left front wheel in the hydraulic unit. The fault lies in the module and affects ABS, stability and traction control.

Mögliche Ursachen

Fault inside the brake control module (BCM)

Was Sie tun können

1Activate the hydraulic unit valves with diagnostic equipment; if no ticking sound is heard, the module has an internal fault
2Clear the code and road test; if it returns, a workshop should replace the brake control module
3After replacing the brake control module, programming and calibration are needed, as a new unit is supplied without software
4The brake system is safety critical: do not work on the brake control module yourself, and drive carefully until the fault is fixed

Symptome, die Sie bemerken können5

Anti-spin function does not work
Anti-skid does not work
Adaptive cruise control and forward monitoring do not work
Yellow symbol and message in the display
The brake pedal requires too much force

Was der Fehler beeinflussen kann3

Anti-lock braking (ABS), traction control and stability control are disabled
Dynamic stability control (AYC) is disabled
Electronic brake force distribution (EBD) and brake assist are disabled

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.