VOLVO
BCM-C001101 - Left Front Outlet Control. General Failure Information. General electrical failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (16)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle Motoren außer: D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module has registered an electrical fault in the outlet valve for the left front wheel in the hydraulic unit. The outlet valve releases brake pressure from the wheel during ABS and stability regulation. The fault may be due to an internal disturbance or a fault in the module.
Mögliche Ursachen
- Fault inside the brake control module (BCM)
Was Sie tun können
- 1Activate the valves in the hydraulic unit with diagnostic equipment; if no ticking sound is heard, the module has an internal fault
- 2Clear the code and road test; if it returns, a workshop should replace the brake control module
- 3After replacement, programming and calibration are needed, as a new module is supplied without software
- 4The brake system is safety critical: do not work on the brake control module or hydraulic unit yourself, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können5
- Information lamp on
- General warning lamp on
- The brake circuit does not work and the warning lamp comes on
- Traction control does not work
- Anti-spin and anti-skid do not work
Was der Fehler beeinflussen kann3
- ABS is disabled
- Traction control, stability control and active yaw control (AYC) are disabled
- Electronic brake force distribution (EBD) and brake assist are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.