VOLVO
BCM-C002013 - ABS Pump Motor Control. General Electrical Failures. Circuit open
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
On the V60, the brake control module (BCM) has detected a break in the circuit to the ABS pump motor, an open circuit. The pump motor builds the brake pressure needed for ABS, stability control and brake assistance. The break may be in the wire, in a loose or oxidised connector, or in the pump motor itself.
Mögliche Ursachen
- Open circuit in the wire to the pump motor
- Loose or oxidised connector at the pump motor or the brake control module
- Damaged pump motor
- Internal fault in the brake control module
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check the pump motor fuse in the engine bay relay and fuse box and that it is not blown
- 3Check that the connectors at the brake control module and the pump motor are secure and free from oxidation, and that the wires are not broken
- 4With diagnostic equipment activate the pump motor and check that it starts and runs normally
- 5If the pump motor does not start, the hydraulic unit is probably damaged and needs replacing by a workshop
- 6Do not work on the brake hydraulic unit or pump motor yourself; leave this to a workshop. Drive carefully until the fault is fixed
Symptome, die Sie bemerken können5
- Front monitoring and City Safety do not work
- Cruise control will not engage
- ABS warning shows a fault or no indication
- Traction control and stability function do not work
- Brake pedal requires more force than normal
Was der Fehler beeinflussen kann2
- Active yaw control (AYC) is blocked
- ABS, traction control, stability control and brake assistance can be disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.