VOLVO
BCM-C00201C - ABS Pump Motor Control. General Electrical Failures. Circuit voltage out of range
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (21)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle Motoren außer: D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
The brake control module (BCM) has detected that the voltage supplied to the ABS pump motor is incorrect. The pump motor sits in the hydraulic unit and builds the brake pressure needed for ABS, stability control and brake assistance. The check only runs once the car has been moving, so the fault is usually noticed while driving.
Mögliche Ursachen
- Poor contact or oxidation in the connections to the pump motor and the brake control module
- Blown fuse for the pump motor
- Open circuit in the supply or ground wire to the pump motor
- Damaged pump motor
- Faulty brake control module (uncommon)
Was Sie tun können
- 1Read the code, clear it and road test the car to see whether it comes back
- 2Check the pump motor fuse in the engine bay fuse box; if it has blown, check the circuit for a short to ground before a new fuse is fitted
- 3Check the connectors at the brake control module and the pump motor for poor contact and oxidation
- 4With diagnostic equipment run the pump motor and check that it starts and runs normally
- 5Do not work on the brake hydraulic unit or pump motor yourself; leave this to a workshop
Symptome, die Sie bemerken können3
- General warning lamp on
- ABS warning lamp on
- ABS, traction control and stability function do not work
Was der Fehler beeinflussen kann2
- ABS, traction control, stability control and brake assistance are disabled
- The brakes still work but without ABS regulation
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.