Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    BCM-C002162
    VOLVO

    BCM-C002162 - Brake Booster Performance. Algorithm Based Failures. Signal compare failure

    System

    Bremssteuergerät (BCM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    13 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (16)
    • Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
    • Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
    • Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
    • Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2007–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
    • Volvo V60 (2011–)2011–2012
    • Volvo V60 (2011–)2013–2014Alle Motoren außer: D82PHEV
    • Volvo V60 (2011–)2015Alle Motoren außer: D82PHEV, D87PHEV
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2008–2015
    • Volvo XC60 (2009–)2009–2015
    • Volvo XC70 (2008–)2008–2015

    Was bedeutet der Fehlercode?

    The brake control module (BCM) controls a pre-pressure valve in the brake booster when adaptive cruise control is active. The valve admits air into the booster so that brake pressure rises automatically. If the actual brake pressure does not match the requested pressure, the module has compared the signals and found a fault.

    Mögliche Ursachen

    • Incorrect vacuum pressure
    • Damaged pre-pressure valve
    • Internal fault in the brake control module

    Was Sie tun können

    1. 1Read and note the code, clear it and road test the car to see whether it returns
    2. 2Check the vacuum system: with the engine off the brake pedal should feel firm, and when the engine is started with the pedal pressed it should give way slightly
    3. 3Activate the pre-pressure valve with diagnostic equipment and check that it responds
    4. 4If the code returns after these checks, the brake booster or brake control module may need replacing by a workshop
    5. 5The braking system is safety critical: do not work on the brake booster yourself; leave this to a workshop

    Symptome, die Sie bemerken können2

    • Adaptive cruise control does not work
    • Front monitoring and active safety do not work

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.