VOLVO
BCM-C002201 - Brake Booster Solenoid. General Failure Information. General electrical failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (21)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle Motoren außer: D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
On cars with the DSTC stability system, the brake control module (BCM) controls a pre-pressure valve that admits air into the brake booster during stability control and anti-skid, so that brake pressure rises automatically. If the module receives a signal from the valve that it cannot accept as reasonable, the code is set.
Mögliche Ursachen
- Contact resistance or oxidation in connectors or joints
- Wires shorted to ground or to supply voltage
- Incorrectly fitted sensor
- Damaged pre-pressure valve
- Internal fault in the brake control module
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3Check the connectors at the brake control module and the pre-pressure valve for contact resistance and oxidation
- 4Check the wiring to the valve for breaks, chafing and short circuits to ground or supply voltage
- 5Activate the pre-pressure valve with diagnostic equipment and check that its status changes
- 6The braking system is safety critical: do not work on the pre-pressure valve or brake booster yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- General warning lamp on
- Traction control does not work
- Stability function does not work
- Anti-skid function does not work
- Adaptive cruise control does not work
Was der Fehler beeinflussen kann1
- Traction control, stability control, active yaw control and brake assistance are blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.