VOLVO
BCM-C003401 - Right front wheel module. General Failure Information. General electrical failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle Motoren außer: D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) has found an electrical fault in the circuit to the right front wheel sensor (wheel module). The module measures the current through the sensor to calculate wheel speed, so an open or short circuit means the wheel speed is lost.
Mögliche Ursachen
- Poor contact or corrosion in the wheel sensor or brake control module connectors
- Open or short circuit in the sensor supply or signal wire
- Damaged wheel sensor
- Damaged brake control module (uncommon)
Was Sie tun können
- 1Check the brake system fuses
- 2Check the right front wheel sensor connector for poor contact, moisture and corrosion
- 3Inspect the cable in the wheel arch for chafing, especially where it moves with the suspension
- 4If the fault remains, have a workshop read the wheel speed and test the wiring with diagnostic equipment
- 5Drive carefully until repaired, as ABS and stability control are not available
Symptome, die Sie bemerken können3
- ABS, traction control and brake system warning lamps on
- Traction and stability control do not work
- Adaptive cruise control, collision warning and auto brake do not work
Was der Fehler beeinflussen kann1
- ABS, traction control, stability control, brake force distribution and brake assist can be disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.