VOLVO
BCM-C003407 - Right Front Wheel Speed Sensor. General Failure Information. Mechanical Failures
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (19)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
The brake control module (BCM) has registered that the wheel at the right front is turning too slowly or stopping compared with the car's speed, or that the wheel speed is changing unrealistically fast. The fault is mechanical and relates to the sensor, the tone wheel or the wheel bearing rather than the wiring. The code is not caused by an internal fault in the module.
Mögliche Ursachen
- The wheel has locked while driving
- Loose wheel speed sensor or incorrect gap between the sensor and the tone wheel
- Wheel bearing play or vibration from the driveshaft
- Damaged tone wheel or damaged wheel speed sensor
- Dirt between the tone wheel and the sensor
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the brake caliper at the right front wheel is not sticking and that the wheel spins freely
- 3Check that the wheel bearing has no play or sticking, and that there is no vibration coming from the driveshaft
- 4Make sure the wheel sensor sits tight against its mounting and that grit or rust is not trapped underneath it
- 5Check that the tone wheel is complete, clean and undamaged. Do not replace the brake control module, as it is normally not the fault
- 6The braking system is safety critical: do not work on the brakes or ABS system yourself, have a workshop do it, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können5
- ABS warning lamp and general warning lamp on
- ABS, traction control and stability function do not work
- Traction control does not work
- Adaptive cruise control and collision warning do not work
- Front monitoring and City Safety do not work
Was der Fehler beeinflussen kann2
- ABS, traction control, stability control and brake assistance are blocked
- Electronic brake force distribution is disabled if two or more wheel sensors stop working
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.