VOLVO
BCM-C003607 - Left Rear Tone Wheel. General Failure Information. Mechanical Failures
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (19)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
The brake control module (BCM) has received a disturbed or interrupted signal from the left rear wheel sensor many times. The sensor reads a tone wheel on the wheel hub, and the fault is most often mechanical: a loose sensor, a damaged tone wheel or dirt between the tone wheel and the sensor. The code is not caused by an internal fault in the module.
Mögliche Ursachen
- Loose wheel speed sensor
- Damaged wiring
- Damaged tone wheel
- Dirt or metal particles between the tone wheel and the sensor
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Make sure the wheel sensor sits tight against its mounting and that grit or rust is not trapped underneath it
- 3Check that the tone wheel is complete, clean and secure, with no missing or damaged teeth
- 4Check that the brake calipers and wheel bearings are not sticking or have play, as a locked wheel gives no signal
- 5Do not replace the brake control module, as it is normally not the fault. Have a workshop check the connectors and wiring with diagnostic equipment
- 6The braking system is safety critical: do not work on the ABS system yourself, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können5
- ABS warning lamp and general warning lamp on
- ABS, anti-spin and stability function do not work
- Adaptive cruise control and collision warning do not work
- Electronic parking brake has reduced function
- Front monitoring and City Safety do not work
Was der Fehler beeinflussen kann2
- ABS, traction control, stability control and brake assistance are blocked
- Electronic brake force distribution is disabled if two or more wheel sensors stop working
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.