VOLVO
BCM-C003A4A - Right Rear Wheel Speed Sensor. System Internal Failures. Incorrect component installed
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2009–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2009–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2009–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) has found that an incorrect type of wheel sensor is fitted at the right rear wheel. The module expects a particular sensor and therefore cannot interpret its signal correctly once the speed is above a certain level. The fault lies in the fitted component, not in the module.
Mögliche Ursachen
- Wrong type of wheel sensor fitted, for example after a repair or replacement
- Incorrect spare part used during earlier work on the car
Was Sie tun können
- 1Check which type of wheel sensor is fitted at the right rear wheel and whether it has recently been replaced
- 2Read and note the code, clear it and road test the car to see whether it returns
- 3Have a workshop fit the correct wheel sensor for the car and check its function afterwards
- 4After the repair, drive the car at a sufficient speed and check that the code does not return
- 5The braking system is safety critical: do not work on the wheel sensor or ABS system yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- ABS indication shows a fault or no indication
- Anti-spin function does not work
- Stability function does not work
- Cruise control will not engage
- Electronic parking brake has reduced function
Was der Fehler beeinflussen kann3
- ABS, traction control, stability control and brake assistance can be disabled
- Active yaw control (AYC) is blocked
- Roll stability control (RSC) is blocked on cars that have it
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.