VOLVO
BCM-C004428 - Brake Pressure Sensor "A". General Signal Failures. Signal bias level out of range / zero adjustment failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) has compared the stored zero point (offset) of the brake pressure sensor with the value saved on the previous drive, and the difference is unreasonable. The fault most often comes from a damaged sensor, but it can also come from the module itself.
Mögliche Ursachen
- Damaged pressure sensor
- Internal fault in the brake control module
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that brake pressure rises when the pedal is pressed, which a workshop can read with diagnostic equipment
- 3If the fault returns, the brake control module normally needs replacing by a workshop, and the acceleration sensor and internal sensors must then be calibrated afterwards
- 4The braking system is safety critical: do not work on the brake system yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können5
- Traction control warning lamp on
- Traction control does not work
- Stability function does not work
- Adaptive cruise control and collision warning do not work
- Electronic parking brake has reduced function
Was der Fehler beeinflussen kann2
- Active yaw control (AYC) is blocked
- Traction control, stability control and brake assistance can be disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.