VOLVO
BCM-C004501 - Brake pressure sensor "B". General malfunction information. General electrical malfunction
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
On the XC90, the brake control module (BCM) has registered an electrical fault in brake pressure sensor B, which measures the pressure in the braking system. The fault may lie in the sensor, the wiring or the module, and the stability functions may be switched off.
Mögliche Ursachen
- Open circuit in the wires to the pressure sensor
- Wires shorted to ground or supply voltage
- Damaged pressure sensor
- Internal fault in the brake control module
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check the connectors at the brake control module and the pressure sensor for contact resistance and oxidation
- 3Look for breaks and short circuits to ground in the wiring running from the pressure sensor to the module
- 4Read the pressure with diagnostic equipment while the pedal is pressed, and replace the sensor if it does not follow
- 5The braking system is safety critical: do not work on the braking system or the sensor yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können4
- General warning lamp on
- Anti-spin function does not work
- Stability function does not work
- Anti-skid function does not work
Was der Fehler beeinflussen kann1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.