VOLVO
BCM-C005128 - Steering Wheel Position Sensor. General Signal Failures. Signal bias level out of range / zero adjustment failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) compares the steering angle from the steering angle sensor with a calculated correction value for the sensor's individual deviation. When the calculated value conflicts with where the wheel is pointing, the code is set. The fault most often comes from the steering wheel or front axle not being set up correctly, not from the brake control module.
Mögliche Ursachen
- Steering wheel incorrectly fitted
Was Sie tun können
- 1Make sure the front axle is correctly aligned and that the steering wheel is correctly fitted before doing anything else
- 2Read and note the code, clear it and road test the car to see whether it returns
- 3Read the steering angle with diagnostic equipment when the wheel is straight ahead and at left and right lock
- 4When the wheel angle reading is off, a workshop zeroes it and recalibrates the stability system
- 5Steering and the stability system are safety critical: do not work on them yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können5
- Traction control warning lamp on
- Stability function does not work
- Traction control does not work
- Adaptive cruise control and collision warning do not work
- Cruise control will not engage
Was der Fehler beeinflussen kann2
- Traction control and stability control can be disabled
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.