BCM-C006128 - Lateral Acceleration Sensor. General Signal Failures. Signal bias level out of range / zero adjustment failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) has judged the correction value (offset) that the stability sensor stores for its individual deviation to be unreasonable. The sensor measures lateral acceleration and yaw rate, and when the value does not match, the stability functions cannot rely on it.
Mögliche Ursachen
- Stability sensor incorrectly fitted
- Loose stability sensor
- Bent bracket for the stability sensor
- Internal fault in the stability sensor
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the stability sensor is secure and correctly fitted, and that the bracket is not bent or damaged
- 3Have a workshop check the sensor calibration with diagnostic equipment. If the fault remains, the stability sensor needs replacing by a workshop
- 4The code being stored can point to a fault in another module, so read the codes in the other modules too
- 5The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- Anti-spin function does not work
- Stability function does not work
- Cruise control will not engage
- Front monitoring and active safety do not work
- Brake pedal requires more force than normal
Was der Fehler beeinflussen kann2
- Traction control and stability control can be disabled
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.