VOLVO
BCM-C006154 - Lateral Acceleration Sensor. System Programming Failures. Missing calibration
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (7)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
On cars with DSTC, the brake control module (BCM) has found that the calibration of the stability sensor is missing or has been reset. The code may be set after the stored offset values have been cleared, for example during a software update, and then it only needs clearing.
Mögliche Ursachen
- The code may be set after the offset values for the sensors in the stability sensor have been reset
- Damaged brake control module
Was Sie tun können
- 1If the code was stored during a software update, clearing it is enough. Then road test the car to see whether it returns
- 2Have a workshop calibrate the brake control module following the manufacturer's instructions with diagnostic equipment, then clear the code
- 3After calibration, read the code status; if it now shows as intermittent, the fault is no longer present
- 4If the code returns after calibration, the brake control module normally needs replacing by a workshop
- 5The braking system is safety critical: do not carry out the calibration yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können5
- Information lamp lit
- Traction control does not work
- Stability function does not work
- Anti-spin function does not work
- Yellow warning symbol and message in the display
Was der Fehler beeinflussen kann3
- Traction control is blocked
- Stability control is blocked
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.