VOLVO
BCM-C006201 - Longitudinal Acceleration Sensor. General Failure Information. General electrical failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S80 (2007–), V50 (2004–2013), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2012
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
The brake control module (BCM) has no signal from the longitudinal acceleration sensor, which is part of the stability sensor. Without it the stability functions cannot assess the car's movement, so they are switched off.
Mögliche Ursachen
- Open circuit or short to ground in the wires to the AYC sensor
- Internal fault in the AYC sensor
- Internal fault in the stability sensor
- Stability sensor for a front-wheel-drive car fitted in an all-wheel-drive car
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check the wires to the stability sensor for breaks and short circuits to ground
- 3Check that the correct stability sensor is fitted, particularly if the car is all-wheel drive
- 4Read the sensor status with diagnostic equipment and replace the sensor if it is damaged
- 5The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- General warning lamp on
- Anti-spin and stability function do not work
- Anti-skid function does not work
- Adaptive cruise control and collision warning do not work
- Traction control does not work
Was der Fehler beeinflussen kann2
- Traction control, stability control and dynamic stability control (AYC) are blocked
- Roll stability control (RSC) is blocked on cars that have it
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.