VOLVO
BCM-C006254 - Longitudinal Acceleration Sensor. System Programming Failures. Missing calibration
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleV40 (2013–), V40 Cross Country (2013–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
On the V40, the longitudinal acceleration sensor, which is part of the acceleration sensor (IMU), has not been calibrated. The code is often set after the brake control module or the airbag control module has been replaced, and the stability functions are then blocked until calibration is done.
Mögliche Ursachen
- Brake control module replaced
- Airbag control module replaced
Was Sie tun können
- 1If the airbag control module has been replaced, the acceleration sensor must be calibrated first, and then the brake control module
- 2If only the brake control module has been replaced, it is enough to calibrate that module
- 3After calibration, read the code status and road test the car to check that the fault is fixed
- 4The braking system and airbags are safety critical: do not work on the calibration yourself; leave this to a workshop
Symptome, die Sie bemerken können1
- Anti-spin and anti-skid indication shows a fault or no indication
Was der Fehler beeinflussen kann3
- Traction control is blocked
- Stability control is blocked
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.