BCM-C006328 - Yaw Rate Sensor. General Signal Failures. Signal bias level out of range / zero adjustment failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The yaw rate sensor in the stability sensor has a correction value for its individual deviation, and the brake control module has judged the value to be unreasonable. The fault most often lies in how the stability sensor is fitted, and the brake control module is normally not the fault.
Mögliche Ursachen
- Stability sensor incorrectly fitted
- Loose stability sensor
- Bent bracket for the stability sensor
- Internal fault in the stability sensor
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the stability sensor is secure and correctly fitted, and that the bracket under the passenger seat is not bent
- 3Check the sensor with diagnostic equipment. If the fault remains, the stability sensor needs replacing by a workshop
- 4Read the codes in the airbag system too, as this code can sometimes be linked to a fault there
- 5The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- Anti-spin function does not work
- Stability function does not work
- Cruise control will not engage
- Front monitoring and active safety do not work
- Brake pedal requires more force than normal
Was der Fehler beeinflussen kann2
- Traction control and stability control can be disabled
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.