VOLVO
BCM-C006464 - Roll Rate Sensor. Algorithm Based Failures. Signal plausibility failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (16)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2009–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle Motoren außer: D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2009–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2009–2015
Was bedeutet der Fehlercode?
On cars with roll stability control (RSC), the brake control module (BCM) judges the signal from the stability sensor's roll rate sensor to be implausible. The fault most often lies in the sensor's mounting or in the sensor itself, and roll control is blocked until the fault is fixed.
Mögliche Ursachen
- Stability sensor incorrectly fitted
- Loose stability sensor
- Bent bracket for the stability sensor
- Internal fault in the stability sensor
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Make sure the stability sensor is firmly fixed and correctly fitted under the passenger seat, and look for any bend in its bracket
- 3Have a workshop read the sensor status and replace the stability sensor if the fault remains
- 4If the code points to the airbag system, the fault may lie there, so have the workshop check that system too
- 5The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- Yellow warning symbol and message in the display
- Anti-spin and anti-skid indication shows a fault or no indication
- Stability function does not work
- Anti-spin function does not work
- Cruise control will not engage
Was der Fehler beeinflussen kann3
- Traction control and stability control can be disabled
- Active yaw control (AYC) is blocked
- Roll control (RSC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.