VOLVO
BCM-C006A01 - Multi-axis Acceleration Sensor. General Failure Information. General electrical failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S80 (2007–), V50 (2004–2013), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2012
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
On cars with DSTC, the brake control module (BCM) supplies the stability sensor with voltage when the ignition is switched on. If the supply voltage to the AYC sensor falls outside the permitted range, even though the module has not energised it, the code is set.
Mögliche Ursachen
- Contact resistance or oxidation in connectors and joints
- Wires to the AYC sensor's supply shorted to ground or supply voltage
- Break in the wire to the AYC sensor's supply
- Internal fault in the AYC sensor
Was Sie tun können
- 1Read and note the code, clear it and road test the car. If the code is intermittent, poor contact is the likely cause
- 2Check the connectors at the brake control module and the AYC sensor for contact resistance and oxidation
- 3Check the supply wire to the sensor for a short to ground or supply voltage, and for breaks
- 4Read the supply voltage with diagnostic equipment and replace the sensor if the supply is in order
- 5The braking system is safety critical: do not work on the sensor or braking system yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- General warning lamp on
- Anti-spin function does not work
- Stability function does not work
- Anti-skid function does not work
- Adaptive cruise control and collision warning do not work
Was der Fehler beeinflussen kann1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.