VOLVO
BCM-C006A17 - Multi-axis Acceleration Sensor. General Electrical Failures. Circuit voltage above threshold
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S80 (2007–), V50 (2004–2013), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2012
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
The voltage to the AYC sensor in the stability system is above the threshold. This can be caused by the supply wire being shorted to supply voltage or by an internal fault in the sensor, and the stability functions are switched off.
Mögliche Ursachen
- Supply wire shorted to supply voltage
- Internal fault in the AYC sensor
- Internal fault in the stability sensor
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check the wires to the AYC sensor for chafing and a short to supply voltage
- 3Check that the charging system works, as excessive voltage in the car can cause this fault
- 4Measure the supply voltage with diagnostic equipment and replace the AYC sensor if the wiring and voltage are in order
- 5The braking system is safety critical: do not work on the AYC sensor or braking system yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- General warning lamp on
- Anti-spin function does not work
- Stability function does not work
- Anti-skid function does not work
- Adaptive cruise control and collision warning do not work
Was der Fehler beeinflussen kann1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.