VOLVO
BCM-C006A47 - Multi-axis Acceleration Sensor. System Internal Failures. Watchdog / safety µC failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S80 (2007–), V50 (2004–2013), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2012
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The stability sensor has sent a message to the brake control module that it has an internal fault in its safety function. The stability functions are switched off until the fault is fixed.
Mögliche Ursachen
- Internal fault in the stability sensor
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Read the stability sensor with diagnostic equipment and replace it if the fault remains
- 3The brake control module is normally not the fault, so it should not be replaced first
- 4The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- Anti-spin indicator lit
- Stability function does not work
- Traction control does not work
- Anti-skid function does not work
- Adaptive cruise control and collision warning do not work
Was der Fehler beeinflussen kann1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.