VOLVO
BCM-C006A95 - Multi-axis Acceleration Sensor. Component Failures. Incorrect assembly
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
11 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2015Alle Motoren außer: B4204T12, D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) has found that an incorrect variant of stability sensor is fitted in the car. The variants differ depending on whether the car is all-wheel drive or has hill start assist. When the fitted sensor does not match the car's configuration, the stability functions are blocked.
Mögliche Ursachen
- Wrong variant of stability sensor fitted
- Stability sensor does not match the car's drivetrain or equipment
Was Sie tun können
- 1Check which stability sensor is fitted and whether it has recently been replaced
- 2Read and note the code, clear it and road test the car to see whether it returns
- 3Have a workshop fit the correct variant of stability sensor and calibrate it afterwards
- 4Until the fault is fixed, take care on uphill and downhill slopes, as the car may start to roll
- 5The braking system is safety critical: do not work on the stability sensor yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- Anti-spin indicator lit
- Traction control does not work
- Stability function does not work
- Adaptive cruise control and collision warning do not work
- The car may roll backwards in D on a slope uphill and forwards in R on a slope downhill
Was der Fehler beeinflussen kann1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.