VOLVO
BCM-C008217 - Brake system malfunction indicator. General electrical malfunction. Voltage too high
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
On the XC90, the brake control module (BCM) has registered that the voltage to it is too high. The most common cause is a fault in the charging system. The brake control module may then switch off the ABS and stability functions to protect itself.
Mögliche Ursachen
- Fault in the charging system
Was Sie tun können
- 1Start the engine and let it idle. Check that the voltage is normal, and if it is too high, check the charging system
- 2Read and note the code, clear it and road test the car to see whether it returns
- 3Check the charging system with diagnostic equipment, as the fault often lies there
- 4The braking system is safety critical: do not work on the braking system yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können4
- General warning lamp on
- ABS warning lamp on
- ABS, anti-spin and stability function do not work
- Anti-skid function does not work
Was der Fehler beeinflussen kann2
- ABS, traction control, stability control and brake assistance are blocked
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.