VOLVO
BCM-C008254 - Brake System Malfunction Indicator. System Programming Failures. Missing calibration
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
11 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Alle Motoren außer: D82PHEV
- Volvo V60 (2011–)2015Alle Motoren außer: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Was bedeutet der Fehlercode?
The brake control module (BCM) has checked the calibration values it stores for the stability sensor and the airbag control module, and the checksum does not match. This often happens when one of these modules has been replaced, and the stability functions are then blocked until the brake control module has been calibrated.
Mögliche Ursachen
- Internal fault in the brake control module
- Brake control module not calibrated
Was Sie tun können
- 1Have a workshop calibrate the brake control module with diagnostic equipment. This is especially needed after replacing the stability sensor or the airbag control module
- 2Road test the car and check that the code no longer appears
- 3If the code status is still permanent after calibration, the stability sensor needs checking, and the workshop replaces it if needed
- 4The braking system is safety critical: do not carry out the calibration or work on the braking system yourself; leave this to a workshop
Symptome, die Sie bemerken können5
- Anti-spin and anti-skid indication shows a fault or no indication
- Stability function does not work
- Adaptive cruise control and collision warning do not work
- Cruise control will not engage
- Traction control does not work
Was der Fehler beeinflussen kann3
- Traction control is blocked
- Stability control is blocked
- Active yaw control (AYC) is blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.