VOLVO
BCM-C100A41 - Brake Pedal Angle Sensor. System Internal Failures. General checksum failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
On the V60, the brake control module (BCM) has found an internal fault in the form of a checksum error in its own data for the brake pedal angle sensor. The fault lies in the module, and after any replacement the internal sensors must be recalibrated.
Mögliche Ursachen
- Checksum error in the module's data
Was Sie tun können
- 1Clear the codes in the brake control module and check whether the fault returns
- 2If the fault returns, the brake control module needs replacing by a workshop. After a replacement, the workshop must recalibrate the acceleration sensor and the internal sensors
- 3The braking system is safety critical: do not work on the brake control module or its calibration yourself; leave this to a workshop
Symptome, die Sie bemerken können4
- Anti-spin function does not work
- Hill descent assist does not work
- Hill start assist does not work
- Front monitoring and adaptive cruise control do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.