VOLVO
BCM-C100E22 - Brake Pedal Angle Sensor Circuit 2. General Signal Failures. Signal too high
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
On the V60, the brake control module (BCM) has received too high a signal from the second output of the brake pedal angle sensor, signal 2. Because the sensor's two outputs should agree, the module cannot rely on the pedal position when the signal is too high.
Mögliche Ursachen
- Damaged wiring to the brake pedal angle sensor
- Damaged brake pedal angle sensor
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Look for damage in the wiring to the brake pedal angle sensor and in the sensor itself
- 3Check the angle sensor with diagnostic equipment and replace it if damaged
- 4The braking system is safety critical: do not work on the brake pedal sensor yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können4
- Anti-spin function does not work
- Hill descent assist does not work
- Hill start assist does not work
- Front monitoring and adaptive cruise control do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.