VOLVO
BCM-C100F11 - Brake Pedal Angle Sensor Supply. General Electrical Failures. Circuit short to ground
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
On the V60, the brake control module (BCM) has detected a short to ground in the supply to the brake pedal angle sensor. The sensor needs a supply to measure the pedal position, so without it the pedal signal becomes incorrect.
Mögliche Ursachen
- Brake pedal angle sensor shorted to ground
- Damaged wiring to the brake pedal angle sensor
- Damaged brake pedal angle sensor
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Look for damage in the wiring to the brake pedal angle sensor, particularly where it may have chafed against ground
- 3Check the angle sensor with diagnostic equipment and replace it if damaged
- 4The braking system is safety critical: do not work on the brake pedal sensor yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können4
- Anti-spin function does not work
- Hill descent assist does not work
- Hill start assist does not work
- Front monitoring and adaptive cruise control do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.