VOLVO
BCM-C10111F - Brake Pedal Feel Simulator Cut-off Pressure Sensor. General Electrical Failures. Circuit intermittent
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
On the V60, the brake control module (BCM) received an incorrect signal from the pressure sensor in the cut-off unit, which belongs to the brake pedal feel simulator, at start-up. The signal is checked when the car is started, and the fault may have been temporary, but the connector and wiring should still be checked.
Mögliche Ursachen
- Damaged wiring to the cut-off unit
- Faulty plug contact at the cut-off unit's pressure sensor
- Damaged pressure sensor in the cut-off unit
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Look for damage in the wiring to the cut-off unit and in the connector at the pressure sensor
- 3Check the pressure sensor with diagnostic equipment and replace it if damaged
- 4The braking system is safety critical: do not work on the cut-off unit or brake pedal yourself; leave this to a workshop, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können3
- Anti-spin function does not work
- Hill descent assist does not work
- Front monitoring and adaptive cruise control do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.