VOLVO
BCM-C101164 - Brake Pedal Feel Simulator Cut-off Pressure Sensor. Algorithm Based Failures. Signal plausibility failure
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
On the V60, the brake control module (BCM) has noticed that the pressure sensor in the cut-off unit gives too low a signal during braking, while the pedal position corresponds to a lower braking torque than expected. The fault may lie in the cut-off unit or in the brake pedal angle sensor.
Mögliche Ursachen
- Faulty cut-off unit
- The pedal angle sensor sends a wrong reading
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Look for damage in the wiring to the brake pedal angle sensor and to the cut-off unit's pressure sensor
- 3Check the cut-off unit and the angle sensor with diagnostic equipment
- 4If the fault remains, the brake pedal or cut-off unit needs replacing by a workshop. The braking system is safety critical, so do not work on it yourself
Symptome, die Sie bemerken können3
- Anti-spin function does not work
- Hill descent assist does not work
- Front monitoring and adaptive cruise control do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.