Was bedeutet der Fehlercode BCM-C101846?

Diagnose und Fehlercodedefinition für BCM-C101846 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

BCM-C101846 - Regenerative Braking. System Internal Failures. Calibration / parameter memory failure

System

Bremssteuergerät (BCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

On the V60, the brake control module (BCM) has found that the calibration of the brake energy recovery system is missing or was not carried out correctly. The system includes several brake sensors, the pump and valves, and it must be calibrated to work properly.

Mögliche Ursachen

Calibration not carried out correctly
Calibration missing

Was Sie tun können

1Clear the codes in the brake control module and road test the car to see whether they return
2Have a workshop carry out the calibration of the brake energy recovery system with diagnostic equipment
3If the fault returns, the brake control module needs replacing by a workshop, and the workshop must then recalibrate the acceleration sensor and the internal sensors
4The braking system is safety critical: do not work on the calibration or the braking system yourself; leave this to a workshop

Symptome, die Sie bemerken können4

ABS does not work or activates suddenly
Anti-spin function does not work
Hill descent assist does not work
Hill start assist does not work

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.