VOLVO
BCM-C102B00 - ABS Secondary Circuit Pressure lower than Primary. General Failure Information. No sub type information
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The brake control module (BCM) compares the pressure in the primary and secondary brake circuits. The code appears when the backup brake circuit reads less pressure than the main circuit, which suggests a leak or damage in the hydraulics. The check is run when the ignition is switched on.
Mögliche Ursachen
- Leak in the brake hydraulic system
- Damage to the hydraulic system, for example a brake line
- Damaged pressure sensor
Was Sie tun können
- 1Check whether brake fluid is visible under the car or the level in the reservoir has dropped, and look for leaks
- 2Check that the brake lines and connections to the brake control module are undamaged and secure
- 3Repair any leaks or damage and clear the code
- 4If the fault returns, have a workshop check or replace the brake control module and recalibrate the sensors
- 5The brake system is safety-critical, so have a workshop carry out all work on the hydraulics and the control module
Symptome, die Sie bemerken können3
- Hill start assist does not work
- Traction control does not work
- ABS does not work or switches on suddenly
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.