VOLVO
BCM-C110668 - Communication between control modules. Algorithm error. Event-controlled information
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
The brake control module (BCM) checks that the steering angle is plausible compared with the car's other signals, once the steering angle sensor has been initialised. The check has not passed at a sufficient speed, so the dynamic stability control is switched off. The code is often linked to the steering angle sensor.
Mögliche Ursachen
- The plausibility check of the steering angle has not passed
- Fault in the steering angle sensor (SAS), if a code for it is also stored
Was Sie tun können
- 1Read the codes in the brake control module and check whether a code for the steering angle sensor is also stored
- 2If this code is stored on its own it can be cleared, and the car then road tested
- 3If a steering angle sensor code is also present, have a workshop diagnose the sensor with diagnostic equipment
- 4The brake and stability systems are safety-critical, so have a workshop carry out any work on the module
Symptome, die Sie bemerken können2
- General warning lamp on
- Anti-skid function does not work
Was der Fehler beeinflussen kann1
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.