VOLVO
BCM-C110687 - Communication between control modules. Bus/message error. Message missing
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Was bedeutet der Fehlercode?
The brake control module (BCM) has found that the wheel alignment or steering alignment is incorrect. The code only applies to cars with DSTC, the stability system, and most often points to the steering angle sensor or the alignment. The stability systems may therefore be switched off.
Mögliche Ursachen
- Incorrect wheel alignment
- Incorrect steering alignment
- Damaged steering angle sensor
Was Sie tun können
- 1Check whether the car has recently had a wheel alignment or work on the steering, as incorrect alignment often causes this code
- 2Read the codes in the steering angle sensor and troubleshoot them with diagnostic equipment
- 3If the steering angle sensor is in order, have a workshop check the wheel alignment
- 4The brake and stability systems are safety-critical, so have a workshop carry out any work on the module and the sensor
Symptome, die Sie bemerken können4
- General warning lamp on
- Traction control does not work
- Stability function does not work
- Anti-skid function does not work
Was der Fehler beeinflussen kann1
- Traction control, stability control and dynamic stability control (AYC) are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.